Old Canada Road Scenic Byway
Madison to U.S.–Canada Border
Western Maine · Maine · United States
Key measurements
- Distance
- 78.3 miles
- Elevation gain
- 5,091 ft
- Elevation loss
- 3,713 ft
- High point
- 2,098 ft
- Low point
- 324 ft
- Net change
- 1,377 ft (576 ft to 1,954 ft)
- Surface
- Paved
- Route type
- point-to-point
Route Overview Tracing one of New England’s historic trade and transit corridors, this 78-mile northbound run follows US-201—the Old Canada Road Scenic Byway—from the river valley town of Madison, Maine, through the heavily forested Kennebec River corridor and Moose River valley, to the Canadian border crossing near Saint-Théophile, Quebec.
The route begins in the rolling farmland and bottomlands of Somerset County, climbing steadily alongside the Kennebec River into the working timberlands of the Maine North Woods. Beyond the whitewater hub of The Forks and the high forested ridge near Parlin Pond, the highway crosses an upland plateau around Jackman before reaching the international boundary. The ride transitions from valley hardwoods to dense boreal forest, climbing over 5,000 feet of cumulative elevation along sweeping river bends, logging haul corridors, and remote ridge crests.
Key Segments & Geographic Transitions
Kennebec River Valley Corridor — Miles 0.1–27.8 Leaving Madison, US-201 heads north along the Kennebec River through Solon toward Bingham. The terrain is dominated by river terraces, small agricultural plots, and mixed hardwood stands. The road maintains a sweeping, gentle rhythm with open sightlines, following the contours of the river basin. Near Bingham, the valley narrows and the surrounding hills grow steeper, signaling the transition from settled farm country into the northern commercial timber belt.
North Woods Ridge and Moose River Upland — Miles 29.0–63.1 North of Bingham and the Wyman Lake impoundment, the highway climbs into rugged, spartan forestry country. Paralleling the upper Kennebec through Moscow and Caratunk to the river confluence at The Forks, the road curves along forested river banks before pulling away from the water to climb toward Parlin Pond. This stretch reaches the route's high point of nearly 2,100 feet near mile 57.4. The road geometry features steady ascents, long sweeping curves, and pavement surfaces impacted by severe winter frost action. Logging trucks carrying timber to regional mills are frequent throughout this segment.
Jackman Border Approach — Miles 63.2–78.3 From Jackman, US-201 (co-designated with ME-6) heads directly for the international boundary through remote spruce-fir woodland and high marshland. The highway straightens out across rolling tablelands, offering broad views toward the border hills. Settlement is minimal along this final stretch until reaching the border station. Beyond the border, US-201 transitions into Route du Président-Kennedy (Route 173) in Saint-Théophile, Quebec.
Seasonal & Environmental Context Spring arrives late in the upper Kennebec region. Winter frost heaves and pavement degradation are common through May, particularly across the higher-elevation stretches around Parlin Pond. Summer provides warm, clear conditions, though insects are prevalent at roadside stops through early July. Autumn brings vibrant foliage across the mixed canopy from late September through early October. Cold weather can settle over the high mountain passes early in the autumn, and unexpected snow squalls are possible at higher elevations in late spring and early fall.
Logistics & Services Fuel and services are available in Madison, Solon, Bingham, and Jackman. Between Bingham and Jackman—a gap of roughly 35 miles—there are no retail fuel stations along the highway. Cell service is spotty or nonexistent through the dense forest stretches between The Forks and Jackman. Because the route terminates at the border, riders planning to cross into Canada must carry valid passports or approved travel credentials for the Armstrong-Jackman port of entry.
Important Considerations Heavy commercial timber transport is a constant feature of US-201. Loaded logging trucks pull onto the highway from unmarked gravel haul roads; give them wide berth on narrow bridges and curves. Wildlife is a significant consideration across the entire route—moose and deer frequently step onto the roadway, particularly at dusk, dawn, and along the boggy stretches north of Jackman.
Motorcycle routes, measured before you ride.
A curated library of scenic roads. Each one is measured — distance, elevation, the roads it follows — and comes with a GPX file for your GPS or riding app.
Featured routes
Browse by state
Every route is measured from its own track first. The description is written from those measurements and reviewed before it is published.
Have a route of your own?
Analyze your own GPX or KMLSee what Route Refinery finds in a route.
Route Refinery measures a route first — roads, elevation, character, terrain and geographic context — then describes what it measured. Below is a finished brief.
Example Route
Analyze your motorcycle route.
Upload a GPX or KML file to measure distance, elevation, road progression, terrain and route character — then get a concise description written from those measurements.
Measured first. Written second.
How it works
- Upload your route.
- Route Refinery measures it.
- Get a concise, shareable description.
Route files may reveal precise start and end locations. Consider using public start and end points before sharing a route publicly.
Route Refinery is under active development. Road information and geographic context may be incomplete in some areas.
Measuring your route…
Reading route geometry…
This can take a minute on a long route. The measurements come first; the description is written from them.
Route progression
Method & limitations
Plan this ride
Plan This Ride personalizes the briefing for this route. It does not change the route itself. To change the start, finish, or route geometry, edit or create the route in your preferred mapping tool and upload the revised GPX to Route Refinery.
Published routes
Every motorcycle route in the Route Refinery library, each one reviewed before it is published.
Every route has a map, its measured distance and elevation, an elevation profile and a GPX download. Browse by place, or scroll the full list.
Browse by place
No routes have been published yet.
Have your own route?
Route Refinery measures and describes an uploaded GPX or KML file the same way as the published library. To change a published route's start, finish or detour, download its GPX, edit it in your mapping tool and analyze the revised file.
Analyze a GPX or KMLSaved routes
| Title | Status | Saved | Country | State/Prov | Region | Route Type | Origin | Destination | Activity | Distance | Source | Reviewed |
|---|